Dripping Bathtubs and Shower Trays? We Will Fix It
Problem wet locations in your house are a common incident and most of the time, they have the tendency to be high usage locations such as the kitchen area sink and the bathroom.
Ravenshead Bath Sealing Contractors - Bath Sealing Contractors For Nottinghamshire - Also Shower Sealing Repair Work
Whereas the kitchen area tends to be more workable and the issues fairly easy to fix, the bathroom can be far harder to manage when it starts causing issues. This could be the time you need to call in a professional in your Ravenshead Nottinghamshire East Midlands area.
We serve these local areas too:
- Blidworth Dale
- Harlow Wood
- Blidworth Bottoms
- Blidworth
- Papplewick
- Newstead
- Haywood Oaks
- Linby
- Annesley
- Cox Moor
Given that the bathroom tends to be a highly wet area due to a reasonable amount of water being splashed while bathing, it can begin to show some indications of wear and tear in vulnerable places. These are generally in the seams where a shower tray or bath tub joins the wall tiles.
Absence of appropriate sealing on the edges of bathrooms and shower trays can present a huge challenge as they can be the vulnerable point where the water and mould eventually wear down and start seeping water through and slowly damaging plasterboards.
Bath Sealing in Ravenshead
A common sign of this scenario consists of a wet odour in the bathroom. Often, it can show up on the lower levels first. A stain point will appear on the ceiling boards as a result of taking in water from the bathroom leakages above. Apart from such a stain being an eyesore, there is an impending threat if there are electrical wires near to the boards.
Such a leakage would have to be addressed quickly by identifying the actual leaking area and rectifying at the earliest opportunity to avoid any danger from escalating.
These sort of issues are common in bathroom locations for two main factors. One is generally incorrect installation and insufficient sealing of the edges of tubs and shower trays. The other may be as a result of aging.
Some plumbing technicians may fail to select the optimum possible location for setting up a shower tray or bath tub which can result in leaking issues later on. For instance, a shower head put in a location near to the window may lead to the shower sprays falling on the window sill and standing there.
This can provide a future issue simply because if the grouting or sealer utilised there is not water resistant and is thought to be ‘porous’, water will leak in and make its way down to the underlying plaster and wood.
Throughout building and repair work, it’s the best idea to guarantee that your home builder or service technician utilises top quality water resistant grout and silicone in your bathroom as water tends to reach unforeseen places in the bathroom during a shower.
Ravenshead Shower Sealing
When it comes to tubs, a common and frequent issue for the majority of tubs appears to be caulking or sealing which cracks regularly. Some homeowners are shocked. The silicon cracks or tends to pull away from the wall after a few months.
Bead size has a lot to do with it. That the width of the opening in between the bath tub and the wall is unequal means there will be sections that are broader while others are narrower, making it tough to find the right size bead to use.
If you use a bigger bead, then you end up having an overflow in the narrower section without the silicon discovering its way into the space. When you go with a smaller bead, your silicon ends up being ineffective in the larger areas since it vanishes into the area without filling it.
A lot of homeowners have shared that while choosing on DIY, they are careful to prep the area to counter any wetness by completely scrubbing and cleaning up with alcohol and letting it dry for a few days before the caulking. In spite of this the majority of people are doing a good job, but they still lament that it fails way earlier than they would have hoped.
One technique is to make sure that you fill the bath tub with water before caulking. This makes sure that the tub is at its optimum weight and extended to leave an ideal space. As soon as you do, the silicon has a better opportunity of staying in place for longer, assuming you have done the preparation work well.
Shower Tray Problems
In many cases when dealing with a dripping shower tray, we have needed to remove the tiles around the boundary of the tray. More examination generally reveals damp plywood that is greatly water damaged specifically if it is not WPB marine plywood.
In one circumstance, we discovered that the boundary of the shower tray still had the plastic covering that it came in. It is such things that make it evident that the initial installer was what we refer to as a cowboy home builder, suggesting they did a lousy fitting.
Unfortunately for the property owner, what ought to have simply been a fairly uncomplicated repair job, turns out to be a major task, and you wouldn’t desire another cowboy home builder mishandling the repair work.
Contracting a highly regarded, precise and proficient service technician is crucial in salvaging an already intricate matter without costing you an arm and a leg.
Silicone Seal Replacing in Ravenshead
To date, we’ve handled numerous uncomplicated cases where carrying out thorough cleansing and applying a tube of silicon around the leaking edges has actually fixed the issues.
But in some instances, we discovered the issue to have gone further, specifically when the installation was not installed properly and subpar materials were utilised.
Why Seek The Help of Professionals?
As experienced experts in bathroom repair work and remodelling, we have worked on numerous cases and observed the damage that is brought on by a dripping bath tub or shower tray. Usually, it’s really expensive if not arrested on time.
Although one can attempt and do a spot fix on it before the service technician gets there, it is recommended that you get the help of a professional.
Every scenario is so different, but after cautious assessment of the issue, our experts will be able to supply you with a workable option that will fix your dripping tub or tray for a long time to come.
It can become fairly tough to detail how to fix a dripping bath tub or shower tray step by step since the scenarios are so varied.
Nevertheless, what you can be ensured of when you call us in is that we will analyse the issue, provide you a precise diagnosis, and after that, based upon that, supply a service(s) that will rid you of the dripping issue for the longest time.
With our crew on your side, you can say goodbye to all your bath leakage issues. We cover your area of Ravenshead NG15 9. Call us today to make your appointment on 0115 822 4995
Blidworth Dale, Harlow Wood, Blidworth Bottoms, Blidworth, Papplewick, Newstead, Haywood Oaks, Linby, Annesley, Cox Moor